Category: Tethered Shooting

Supported Camera models GFX100/GFX100S/GFX50S/GFX50S2/X-S20/X-S10/X-T5/X-H2/X-H2S Take Fuji FilmX-T5 as an example Initial Pairing Network settings Choose NETWORK SETTING in NETWORK/USB SETTING, and select a network configuration.Note: If the NETWORK SETTING is grayed-out and cannot be clicked, you need to set the CONNECTION MODE to USB CARD first. Select 1, for example, then switch ACCESS POINT SETTING to MANUAL SETUP, and set as SELECT FROM NETWORK LIST. Then you are…

Supported Camera Models Z9/Z8/Z7Ⅱ/Z7/Z6Ⅲ/Z6Ⅱ/Z6/Z5/Z50/Z30/Zfc/Zf Take Nikon Z8 as an example. Initial pairing Select Connect to computer in the Network menu, and set the Connection type to Camera control (this step is very important, otherwise you will not be able to receive pictures even if you take photos after the connection is successful). Then, go back to Connect to computer, switch to Network settings, and…

Supported cameral models R/RP/R5/R5M2/R6/R6Ⅱ/R6M2/R7/R8/R10/R50/5D4/6D/6D2/70D/77D/80D/800D/M50/M50M2 Take EOS R5M2 for example. Initial Pairing Go to Menu and find Network Function → Connect to EOS Utility. Choose Add a device to connect to, select New settings, and tap Wi-Fi to choose the same wireless network that the iPad is connected to, and enter the password to begin the connection. Set IP address setting(IPv4) to Auto setting, and TCP/IPv6 to Off, then click OK for…

Supported cameral models ILCE-9M3(A9M3)/ILCE-9M2(A9M2)/ILCE-7RM5(A7R5)/ILCE-7M4(A74)/ILCE-7RM4(A7R4)/ILCE-7RM4A(A7R4a)/ILCE-7SM3(A7S3)/ILCE-7CM2(A7C2)/ILCE-7C(A7C)/ILCE-6700(A6700)/LIME-FX30/LIME-FX3/ZV-E10 Take Sony 7CM2 as an example Initial Pairing Select Wi-Fi in Network setting, switch Wi-Fi Connection to On. Click the Access Point Set, select the wifi of the address, click and enter the password to connect. Connected to wifi successfully. Get back to Network setting, click Network Options and switch Access Authen. Settings to Off and click OK. Then you need to turn on wireless connection: choose PC…